Test reports

Daily work

Test reports

The report a request prints for your client: the notice, and for every sample the opinion and the test report. SmartLIMS shows it exactly as it prints, page by page, from the request's data.

Who this is for: Lab staff and laboratory owners · You need: the "Manage requests" permission (and "Manage report templates" to change how reports look)

The idea in short

One print is a set of separate documents, in this order:

Document How many What it holds
Notice (Obaveštenje) Once for the request Who it is addressed to, the request's details, the list of samples and the overall verdict
Opinion (Mišljenje) One per tested sample The request and sample details, the verdict and the expert opinion, with its signature
Test report (Izveštaj) One per tested sample The request details and signatures, then the sample's own data, then the results — one table per group of parameters

That is the standard layout. A report template can use the cumulative layout instead: one notice, one opinion and one test report over all the samples, numbered with the request number. The test report's first page has the request's details and the signatures. From the second page on, the samples follow one after another, each with its own data and results. If some samples comply and others don't, each group gets its own notice, opinion and test report.

Each document counts its own pages ("Page 2 of 3"). Every page repeats the letterhead, the document's title and number, and its footer. The last page of each test report says End of report.

Draft, then issued: until a report is issued every page says DRAFT. You give it its verdicts and signers, fine-tune its texts, and issue it once the request is Authorized. An issued report is kept exactly as it was issued. See How to approve and issue a report.

One report or several: a request usually gets one report for all its samples. When some samples or tests are done before the others, you can report them first and the rest later, and an issued report that needs a correction is replaced by a new one. See Several reports for one request.

How to find a report

  1. Click Test reports in the sidebar. The list shows the requests whose results are Validated or later (Authorized, Ready to send, Sent), with the number the report carries, who it is addressed to, the samples, the form and the status. The figures at the top count them — Total, To authorize, To send (authorized or ready to send) and Sent; click To authorize or Sent to see just those.
  2. Search by number, form or sample, or filter by status and form. View settings (the icon left of the filters) shows the list as a table or as cards.
  3. Click a row to open the report. Its ⋯ menu opens it in a new tab or shows its request.

From a request, open the ⋯ menu and click Test report. It is there once the request is Validated or later.

How to preview and print a report

  1. Open the report. The pages are shown one under another, as they will print.
  2. To see one sample only, choose it in the box above the pages. You then see that sample's opinion and test report.
  3. To leave the notice out, click View settings (the sliders button at the start of the bar above the pages) and turn off With notice. It only applies with All samples. Turn off With opinion to print or save the report without the opinions, for a customer who did not ask for one. Neither changes the report itself: it is issued and kept with every document, and both switches are on again each time you open a report. While the report is a draft, the Test column slider in the same bar sets how wide the test column of the results tables is; unit, result and reference share the rest evenly. The pages change as you drag, and the width is saved with the report, so it prints and is issued that way.
  4. Click Print. Your browser's print window opens with exactly the pages on screen. Choose A4.
  5. To get the report as a PDF file instead, click ⋯ and then Save as PDF. SmartLIMS makes the PDF and your browser downloads it after a few seconds. It has exactly the pages on screen: the sample you picked, and the View settings you turned on or off. The file is named after the report number, with "DRAFT" added while the report is not issued yet. The report template can name it after the request's internal number instead, or after both, external first (PDF file name); when a request has both numbers, PDF name in View settings picks another one for this download. A second report or a translation keeps its "/2" or "E" at the end of the name.

If your company prints reports in more than one language, choose the report's language in the box above the pages. A warning there says when some texts aren't translated yet, and Translate (in the ⋯ menu at the top right) lets you translate them right on the report. See Translations.

A report prints with its form's report template. To print one request's report with another template, choose it in the template box above the pages, next to the language. The change is for this request only: other requests keep their form's template, and the form doesn't change. Choose the one marked (from form) to go back. Each change is written to the request's Activity with who made it and which template it changed from and to. You can change the template only until the report is issued; an issued report keeps the template it was issued with.

The end of the bar above the pages says how many documents and pages the print has.

📷 Screenshot: a test report preview with the sample box and the Print button

What a report shows, and where you set it

A report has no text of its own to type. It is put together from what the request already holds, so you change a report by changing its source:

On the report Where it comes from
The request and sample details The form's fields. A field marked Shown on report is on the test report, Shown on opinion on the opinion, Shown on notice on the notice. Empty fields are left out. They are grouped by the form's sections (the section's name in the margin or above, as the report template says) and follow its order; each field's Width on report decides whether it shares a line. See Sections and width.
The small kl next to a field, and the note "Data provided by the client" The field's Provided by client setting on the form
Names of customers, inspectors and laboratories The customer's Report name (or its name), the inspector's title and name, the laboratory's name and location
The results The work order: each parameter's name and footnote mark, unit, result, reference value for the report and its suffix, and the method (the parameter's code). See Work orders and results.
The notes under each results table The group's legend, origin and report text in the work order, in the report's language. See Legend, origin and report.
The opinion text The Expert opinion of the sample's work order, or of the whole request
The letterhead, the accreditation marks image, the document codes (e.g. PR23-OB01) The form's Report tab
Which documents print, where the accreditation marks show, the results columns, footers, texts and signature captions The form's Report template, or the one chosen for this report above the pages (see How to preview and print a report). See How to set up report templates.
Who signs The approvers on the form's Report tab, unless you change them when you approve the report: anyone in your company, several per signature. A signer the form sets to sign for some departments signs only the samples those departments tested (Signers by department). One sample's signers can also be changed by hand on its own (see step 4 of How to approve and issue a report). Remove everyone from a signature and that line is left out of the report: nobody signs it, and the report can be issued without it. Use the form's people brings them back. The Issue confirmation names every signature left out.
The signature, stamp and title of each signer The signer's user details. See Your signature and stamp.
The verdict (COMPLIES / DOES NOT COMPLY), on its own line under the lead sentence Given on Result confirmation (Verdicts and signers); the sentence can be fine-tuned when you approve the report

Until the report is issued, a change to any of these shows the next time you open the report. The opinion, a group's notes and a remark per document can also be changed on the report itself. See Fine-tune the texts.

How to approve and issue a report

  1. Give each sample its verdict, Sample complies or Sample does not comply, on Result confirmation (Verdicts and signers). Verdicts are given only there.
  2. Open the report and click Verdict and signers. On Samples you see each sample's verdict and the text its opinion prints it with: the sentence "According to the tested parameters, the submitted sample:" and, centred on the next line, COMPLIES. Change the text if this report needs other words, for example the regulation the sample complies with; the centred line prints as the verdict. The change is for this report and this verdict only: if the verdict changes later, the standard text prints again.
  3. On Notice, check the notice's text. When every sample has the same verdict, one notice prints. When they differ, two notices print, each on its own pages: one lists the samples that comply and ends in COMPLY, the other lists the samples that don't and ends in DO NOT COMPLY. You can fine-tune each in the same way.
  4. On Who signs, check who signs for each signature. It starts with the people the form names for that role; add anyone in your company, remove people, or have several sign (they print in the order you add them). Use the form's people goes back to the form's choice. On a report with several samples, Per sample below lists who signs each sample's opinion and test report. Change on a sample sets other people for that sample alone — or removes everyone, and that line is left out of its documents. What you pick there prints exactly as picked; Same as the whole report goes back. The notice always signs as the roles above say.
  5. Click Save changes. The pages now show the verdicts, and each signer's name, title, signature and stamp. Clicking a verdict on the pages also opens this drawer.
  6. When the request is Authorized, click Issue and confirm. (A report on only part of the request can be issued earlier: see Report part of a request first.) The report is dated today and frozen: from then on it prints exactly as it was issued, even if the request, the form or the results change later. A badge Issued with the date shows on the page and in the list.

Issue is not available until the request is authorized (unless the report covers only part of it), and it asks you to finish first if a verdict or a signer is missing. Every change to the draft and the issue itself are recorded in the request's History.

An issued report can't be changed. A correction is a new report that replaces it. See Replace an issued report.

Stamp and signature. In View settings, turn off Stamp and signature to print without the signature and stamp images, for example to sign and stamp the paper by hand. The pages stay exactly the same; only the images are left out. Both settings are on again each time you open a report, so a later print never loses its stamps by accident.

Attached documents. Documents on the request marked Include in report print with the report: a sample's pictures under that sample's details, three to a row, and the request's own documents on their own pages at the end, every page of a PDF on a sheet of its own. Only pictures (JPG, PNG, GIF, WebP) and PDFs print; other files are left out. To print without them, turn off Attached documents in View settings. Like the stamp, it is on again each time you open a report.

Send the report

Once the request is Authorized, the report page shows Prepare for sending: the request is Ready to send while you put the report together. Then Mark as sent asks for an optional note (how and to whom it was sent) and moves the request to Sent, which locks it. Both are also in each row's ⋯ menu on the Reports list, and Mark as sent in the ⋯ menu on the Requests list. See Sent and locked.

Several reports for one request

A request can have more than one report. Each report covers some samples and, for each sample, some groups of parameters. A result is never on two valid reports at once.

Report When Number
The whole request The usual case: everything at once The plain number, e.g. GSI280826005
A partial report Some samples or tests are done before the others /1, /2, /3 … e.g. GSI280826005/1
A supplementing report The rest, after a partial report The next number, e.g. GSI280826005/2
A replacing report An issued report needs a correction The next number, e.g. GSI280826005/3

A report that covers everything when it is issued keeps the plain number. Numbers are given when a report is issued and never change. If a request has more than one report, choose the one you want in the box above the pages (Report 1, Report 2 …, with in preparation, replaced by … or replaces … next to it).

Report part of a request first

For example, a customer sent six samples and wants a report on the four that are done; the other two take longer.

  1. Open the report and click Scope in the ⋯ menu at the top right.
  2. Tick the samples this report covers. For a sample you report only in part, tick just its groups that are done. Groups already on another valid report show On report … and can't be ticked.
  3. Under Options, Expert opinion for samples reported in part decides what prints for a sample with only some of its groups: off, only its results; on, its opinion and verdict too, worded "for the tested parameters".
  4. Save. The report is numbered /1, and its first page says what it covers. You can change that text in Edit texts, under Coverage and changes.
  5. Approve and issue it as usual (How to approve and issue a report). A partial report can be issued before the request is authorized, once every result on it is confirmed.

When the rest is done, open the report and click New report for the rest in the ⋯ menu. It starts with everything no valid report covers yet, says which report it supplements, and is issued the same way. Discard report throws a report in preparation away; the results stay as they are.

Leave a result off a report

In Scope, untick a single result's checkbox and give the reason, then click Leave off. Nothing of that result prints on this report. The reason is kept in the request's History.

Replace an issued report

  1. Correct what is wrong where it comes from: redo the test, change the result, or delete a parameter that was added by mistake (see After a report is issued).
  2. Open the report and click Replace report … in the ⋯ menu, then Replace. The new report starts with the old one's samples, groups, verdicts, signers and texts.
  3. In Edit texts, under Coverage and changes, check the sentence naming the report it replaces and fill in Changes: what changed and why. The changes found in the results are filled in for you. A replacing report can't be issued without them.
  4. Mark changed results (in Scope → Options, on by default for a replacement) marks each result that differs from the replaced report with *, explained under the table.
  5. Issue it. The old report is marked replaced by …: it stays exactly as it was issued and is no longer valid.

A replacing report covers at least everything the replaced one did.

Translate an issued report

When a customer asks for an issued report in another language, for example English:

  1. Open the issued report and click Translate issued report… in the ⋯ menu.
  2. Pick the report and the language, then Start translation. A new report starts with the same samples, results, verdicts and signers.
  3. Translate its texts with Edit texts and Translate, as for any report.
  4. Issue it. It carries the original's date, and the original's number with the language's mark: GSI280826005E for English.

The translation says only what the original says: its samples, verdicts and signers can't be changed. If a result changed since the original was issued, SmartLIMS won't issue the translation. Replace the original first and translate the replacement. A translation is not invoiced, and once its original is replaced it is no longer valid either.

The mark for each language is set in Settings → Forms & reports → Translations, tab Languages (see Translations). Without one, English uses E and other languages their code.

After a report is issued

Results on an issued report can still be changed, but SmartLIMS keeps track of it. When a result on an issued report is sent to redo or reopened, a parameter or group is deleted, or one is added to a reported sample:

  • the work order shows On issued test report … and warns you before the change,
  • the change is written to the request's History with the report's number,
  • the request and the report show that a replacement report is needed, until one is issued.

Deleting a parameter or group once testing has started needs a reason. The deleted row, with its result and who entered, verified and confirmed it, is kept in the request's History.

Invoicing per report

If your company invoices through Financial, each report is invoiced on its own: the first report with what it covers, each supplementing report with only what is new. A replacing report is not invoiced again. See Financial (invoicing).

Fine-tune the texts

Open the ⋯ menu at the top right and click Edit texts to change, for this report only:

  • the expert opinion of each sample,
  • a group's notes under its results table (legend, origin and report),
  • a remark at the end of any document (printed as "Note:"),
  • under Coverage and changes, what the report covers, the report it replaces and the changes (on a partial, supplementing or replacing report).

You can also start from the report itself: on a report not issued yet (and outside translation mode), a text you can change is outlined when the pointer is on its page, and a click opens Edit texts at that text. A + in the margin, where the remark would print, adds a text the document doesn't print yet, such as a remark.

A changed text is marked Edited, and Use the original brings back the one from the work order. Results, units, reference values, methods and the request's fields can't be changed here. Correct them on the work order or the request, so the report and the request always agree.

How pages break

SmartLIMS follows the same rules as the reports your clients already know:

  • Every document starts on a new page.
  • In a test report, the sample's data starts a new page, and so do the results.
  • A results table that doesn't fit continues on the next page. Its header row is repeated and the numbering carries on (P8 follows P7).
  • A group's title never stays alone at the bottom of a page: it moves to the next page with at least its first row.
  • A group's notes stay with their table. If they don't fit, the table's last row moves to the next page with them.
  • The accreditation marks are in the header of the documents the report template names (the test report only, unless you change it).
  • The last page of each test report says End of report in its footer.

What is not there yet

  • A stored PDF. Save as PDF makes the file each time you click it. No PDF is kept with the report when it is issued yet.
  • Other layouts. The compact layout of the old system will come later. Reports already print in any language: see Translations.

Tips

  • If a field is missing from a report, check its Shown on report, Shown on opinion or Shown on notice setting on the form, and that it has a value.
  • If a customer's name is too long on reports, give the customer a shorter Report name.
  • Use one sample's view to check a single report before printing the whole request.
↑↓ to move ↵ to open esc to close