Lab requests

Daily work

Lab requests

A request is a customer's order for testing, with one or more samples. This page shows how to find requests, create one, fill it in, move it through its statuses and keep a record of what happened.

Who this is for: Lab staff · You need: the "Manage requests" permission

The idea in short

Every piece of work in SmartLIMS starts with a request. A request:

  • is created from a form, which decides which fields you fill in (see Forms);
  • holds one or more samples, each tested on its own work order (see Work orders and results);
  • has one status for the whole order: Received → Configuration → In progress → Validated → Authorized → Ready to send → Sent;
  • has an internal and an external tracking number (see Tracking numbers).

You work with a request on these pages:

Page What you do there
Requests list Reception: find, filter and open requests
Work order setup list Technicians: the requests whose work orders are being prepared
New request Pick the form and name the samples you received, in a few seconds
The request page and its Edit request page Fill in everything else, set up the samples, move the status on

Find a request in the list

Open Requests in the sidebar. The list shows the requests reception is still working on, newest first, or every request the laboratory has received (see Reception or all requests below). The figures at the top count the requests in that list: the Total (with "+N" received in the last 30 days), how many are Received and In progress, and how many are Overdue — past the work order end date set on the request and not yet validated. Click a figure to see just those requests; Total clears the filters again.

  1. Type in Search to find a tracking number, a form, or a sample's name or number, then press Enter. Upper and lower case and accents don't matter ("sabac" finds "Šabac"). With several words, each one has to appear somewhere in the request: apple 2026 finds requests that have an apple sample and 2026 in a tracking number.
  2. Use Received to limit the dates. Pick a quick range (Today, Last 7 days, This month…), pick days in the calendar, or type the dates. You can leave either end open.
  3. Narrow down with All statuses. + Add filter has the rest: Due (the work order end date: Overdue, Today, Tomorrow, Later or No date), Form, Laboratory, Requester and — if you can see invoices from Financial — Billing (see Financial). A filter you added stays on the bar while it holds a value.
  4. Click a column heading to sort. Status sorts in workflow order; Created starts with the newest.
  5. Click a row to open the request's Edit request page. To prepare its work order instead, use Prepare work order in the row's ⋯ menu. Use Load more at the bottom to see the next 25.

The filter bar stays at the top while you scroll. When you open a request and come back, with ← Requests or your browser's Back button, the list is as you left it: the same filters, sort, loaded rows and scroll position. The filters are part of the page address, so you can bookmark a filtered list or send it to a colleague. Opening Requests from the sidebar starts a fresh list.

The Samples column shows each sample with a coloured dot for its work-order status. The parts of a set appear under their sample. A long list folds into "Components: N" and "+N more"; point at it to see the whole tree.

Reception or all requests. At first the list shows only the requests reception hasn't completed yet, in any status: technicians may already be setting up the testing while reception still adds photos and fields. Once reception clicks Complete reception on a request (see Complete reception), it leaves this list. To see every request, open View settings (the icon at the left of the filter bar) and under Show pick All requests; pick Reception to go back. The description under the page title says which one you are looking at. This choice is not a filter: Clear filters leaves it as it is, and the filters work within it. It is remembered in this browser.

View settings switches between Table and Cards. In cards view you choose the number of Columns and whether Card icons show; Ctrl-click (⌘-click on a Mac) opens a card in a new tab. Your choice is remembered in this browser.

To delete requests, use the ⋯ menu on a row, or turn on Bulk select in View settings, tick the rows and click Delete in the bar at the bottom. Only requests still in Received can be deleted. Bulk delete skips the others and tells you how many it deleted and how many it left as they are. A deleted request can't be restored.

📷 Screenshot: the Requests list with the date filter open

Create a request

Creating a request takes only the form and the names of the samples. Everything else is filled in afterwards.

  1. Click New request (on the list, on the dashboard, or the + beside Requests in the sidebar).
  2. Under Form, click the card of the form that matches the request. The form you used last comes first, marked Last used. You can also press 1–9 to pick a card. If you are assigned to laboratories, only their forms are shown (see Users, roles and permissions).
  3. Check the laboratory shown under the form ("Laboratory: …"). It is the first laboratory the form is allowed for, or the first of yours if you are assigned to laboratories.
  4. Choose the Regulatory frameworks that apply, if any, and how the expert opinion is written: Per work order or Consolidated expert opinion (see Expert opinion).
  5. Fill in General information: the fields of the form that describe the whole request.
  6. Under Samples, type a Sample name for each sample you received. Press Enter to add the next one, or paste a list to add one sample per line.
  7. Click Create request, or press Ctrl + Enter (⌘ + Enter on a Mac).

The request is created in the Received status, and SmartLIMS opens its edit page so you can fill in the rest.

To use a different form, click Change form. The samples you typed stay; the general information is cleared after you confirm. The browser's Back button does the same. If you reload the page, the chosen form opens again, but the values you typed are lost.

If there are no forms yet, the page offers Set up a form. People with the "Manage forms" permission also see a Manage forms link.

Quick and full entry

SmartLIMS splits entry into two steps so that reception is fast:

Quick entry: New request Full entry: Edit request
When While the customer or courier is at the desk Right after, or later
What you enter Form, frameworks, expert opinion choice, general information, sample names Tracking numbers, documents, each sample's fields, documents and frameworks, sets
How long Seconds As long as it takes

There is no switch between the two. Create request finishes the quick step and opens the full one. You can come back to the full step at any time with Edit request on the request page.

Edit a request

Click the request's row in the list, or Edit request on the request page. The header shows the internal number, the form and its version, the status, the laboratory and who created it. View request takes you to the request page.

The page has two tabs: Request details and Samples. The number on Samples is how many samples the request has. A tab you open stays open when you reload the page.

Request details

  1. Under Tracking numbers, check the internal number. You can change it; it must be unique in your company. The external number is assigned when the request is created and never changes.
  2. Fill in General information. When the work should be done is worked out for each work order from its tests (see Estimated end).
  3. Under Documents, drop files on the box or click Add document. Each file shows a preview. Drag the tiles to change their order, tick Include in report on the ones that belong with the results, or click Remove. Documents save at once.
  4. Under Regulatory frameworks, click Show to choose the rulebooks that apply to all samples, and whether the expert opinion is written per work order or once for the request. A customer's own (private) rulebook is offered only after that customer is picked in the general information. See Regulatory limits.
  5. Click Save changes to save and go back to the request page, or Save and Stay to save and keep editing. Cancel leaves without saving.

While request details have changes you haven't saved, the Request details tab shows an orange dot, and the Samples tab reminds you to save them. If a required field is empty when you save, the page opens the tab (and the sample) where it is.

Samples

  1. Click a sample in the list on the left. On the right, fill in its name, its fields and its documents. A chip in the sample's header shows its rulebooks: Rulebooks: N while they follow the request's choice, Own rulebooks: N (amber) once the sample has its own. Point at it to see their names. To change them, click the chip, or Rulebooks for this sample… in the sample's ⋯ menu, pick the rulebooks and click Save. Reset to request default, in the same window, makes the sample follow the request again.
  2. Click Add sample to add another one. It is created at once, named "Sample N", and opened. Drag samples in the list to change their order.

Samples need no Save: a sample's name and fields save by themselves a moment after you stop typing. The sample shows "Saving…", then "Saved" (or "Not saved" if something went wrong). A sample must have a name.

The ⋯ menu of a sample (Sample actions) holds Messages, Add component (for a set, see Sets), Duplicate sample… (see Many similar samples) and Remove sample. Removing a sample happens at once, after you confirm, and takes its components, documents, frameworks and work orders with it. A removed sample's number is never reused.

To remove several samples at once, click Select next to Add sample. Each sample gets a checkbox: click a sample to tick it, or Shift+click to tick everything between it and the last one you ticked (Select all ticks them all). A ticked sample takes its components with it. Click Remove selected and confirm. If any of the samples already has results entered, nothing is removed and SmartLIMS names those samples: remove them one at a time from their own ⋯ menu, so a sample with results is never removed by accident. Done (or Esc) leaves the selection. Both ways of removing are recorded in the request's history, with the removed samples' numbers.

While the request is still Received, the menu next to Save changes also holds Delete request.

Many similar samples

When a delivery has many samples that differ only a little (46 apples from one orchard, with different lot numbers), fill in one sample, then copy it:

  1. Fill in the sample's name and fields.
  2. Open its ⋯ menu and click Duplicate sample….
  3. Enter the Number of copies (up to 200). With Number the names on, "Apple" becomes "Apple 1" and the copies "Apple 2", "Apple 3", …; a name that already ends in a number counts on from it ("Apple 07" → "Apple 08", …). Duplicating again continues after the highest number already used, so no name repeats. The window shows the names before you confirm.
  4. Choose whether to copy its components (shown only for a set) and its documents (off unless you tick it). If the sample already has a work order and you may plan work orders, you can also copy its work orders: see The same plan for many samples.
  5. Click Duplicate.

The copies are added at the end of the list, each with its own number, so the list stays in number order. They take its fields and rulebooks. Its people, configuration, work orders and messages stay with the original. Then open each copy and change what differs. The request's history records the duplication.

Send to laboratory

The laboratory doesn't have to wait until reception has entered everything. While the request is Received, click Send to laboratory at the top right of the page and confirm: the request moves to Configuration, and the technicians can start setting up its samples. The request stays on the Reception list, so you can keep adding photos, fields and documents, and complete reception later. Once sent, the request can no longer be deleted.

Complete reception

When reception has entered everything (the request details, every sample, all photos and documents), click Complete reception at the top right of the page. If the request is still Received, it also goes to the laboratory (status Configuration); if it was already sent, its status stays as it is.

  1. Save your changes first. While something is unsaved, SmartLIMS asks you to save before it lets you complete reception.
  2. Click Complete reception and confirm.

The request leaves the Reception list on the Requests page, and the header shows "Reception completed" with the date and who completed it. This can't be undone, but you can still edit the request afterwards. The request's history records it.

If the technicians report missing data, the request comes back on the Reception list, and a yellow note at the top of its edit page says what is missing, for which sample, who reported it and when. On the Requests list (and on Work order setup) the request carries a red Missing data badge under its status; hover over it to read the note. Add what is missing, then click Complete reception again, and the badge goes away.

📷 Screenshot: the Edit request page, with the sample list on the left and one sample open on the right

Sets

A set is one sample made of parts that are each tested on their own, for example a gift box with a hand cream, a soap and a lotion. In SmartLIMS the parts are called components.

  1. On the Edit request page, open the sample's ⋯ menu and click Add component.
  2. The component is created at once, named "Component N", and opened. Give it a Component name and fill in its fields.
  3. Repeat for each part.

Each component has its own fields, documents, configuration, work orders and reflex setting, just like a sample. Components appear under their sample in the request list and on the request page.

Testing a set. On the request page and on Work order setup, a set is tested through its components: open the set and its Components step lists them, each with its work order and progress; click one to open it. Sometimes the set itself needs testing too, for example its packaging, labelling or declared weight. Click Also test the set as a whole under the list: a The set as a whole step appears with its own work order. To take it back, click Cancel in that step before the work order is made, or Remove after; Remove asks first and deletes only the set's own work order. The components and their work orders stay as they are.

Rules:

  • Sets are built on the Edit request page, not on the New request page.
  • A component can't have components of its own: there is only one level.
  • You can't turn an existing sample into a component of another sample. Remove it and add a component instead.

Work order setup

Work order setup in the sidebar, under Lab work, is the technicians' list: the requests whose work orders are being prepared. It shows the requests in Configuration, newest first. A request is here as soon as reception sends it to the laboratory (see Send to laboratory) or completes reception, even if reception still adds photos and fields: you can start setting up the testing in the meantime. A request sent back to configuration for further testing (see Reflex testing) comes back to this list.

  1. Open Work order setup in the sidebar.

  2. Find the request. The search, the filters and View settings work as on the Requests list (see Find a request in the list), except Status: everything here is in Configuration. The bar has All due dates instead, and a Due column shows each request's work order end date — red once it has passed. The figures at the top count what is Waiting here and how much is Overdue, Due today and Due tomorrow; click one to see just those. Instead of the status, each row shows how far its setup is: Work order on every sample (3/3) and Every sample configured (2/3), with a green tick once a check is done. Anyone's part narrows the list to your own share of the setup:

    • Waiting on me: a sample you configure and have not marked done, or a sample nobody configures yet, which you can take with Add me.
    • Done, waiting on others: you have marked your part done on every sample you are on, and the request still waits on someone else or on a sample nobody configures yet.

    A request with a sample nobody configures shows under both.

  3. Click the request. Its Work order setup page opens (see below). View request and Edit request are in the row's ⋯ menu.

Work order setup or all requests. To see every request here, open View settings and under Show pick All requests; pick Work order setup to go back. The description under the page title says which one you are looking at. As on the Requests list, this choice is not a filter: Clear filters leaves it as it is. It is remembered in this browser, separately from the Requests list.

Creating and deleting requests is reception's work, so this list has no New request button, no Delete and no Bulk select.

📷 Screenshot: the Work order setup list

Set up one request

A request's Work order setup page holds only what you need to prepare its work orders. It shows the same samples and work orders as the request page: what you change on one, you see on the other.

  • The header shows the request, its status and where reception stands as a second badge: Reception completed (point at it for the date and who completed it) or Reception in progress. Under it, each fact has its own icon: the form and its version, the customer, the laboratory, when and by whom the request was received, and Due with the date its work orders should be done, when one is set (see Edit a request). While reception is still at work, a yellow note says so: photos, documents or sample fields may still change, so check the samples again before you move the request on.
  • Subcontracted work, in the ⋯ menu at the top right (with the number of subcontracts already made): send groups of parameters you can't do yourself (see Sending work to another laboratory). It opens in a panel on the right.
  • Each work order here says how far its planning is instead of how many results are verified: how many groups and parameters it has, and how many parameters are assigned to someone.
  • The samples are on the left. All and To set up (samples not configured yet, or with no work order) filter them. The page opens on the first sample still to set up. With more than one sample the list starts folded; see Moving between samples. Click a sample to open it on the right: its details and documents, then Configuration, Preparation (when the sample has one) and Work order, as on the request page (see Configure each sample). The work order opens in its setup view: groups, departments and who does what. Results are entered on the request page.

Missing data

If something reception should have entered is missing (a label photo, a lot number, a document), click Missing data, pick the whole request or the sample it is about, and say what is missing. Reception gets your note as an instruction, and the request goes back on reception's list; its edit page shows your note until reception clicks Complete reception again. You can keep setting up the work orders in the meantime.

When every sample is ready, click Start configuration (while the request is Received), then Move to in progress. The request then leaves the Work order setup list, and the page says the work orders are prepared, with a link to the request page.

Several departments, one at a time

When a request has work in more than one department, each department can pass its part on as soon as it is set up, without waiting for the others. Move to in progress then opens a short list of the departments, each with how many samples it has work on. Tick the ones that are ready and click Move to in progress: their work goes to the analysts straight away (it shows on Today and in their My work), while the other departments keep setting up. A department already passed on stays in the list, ticked and greyed, with who did it and when; the button shows how many are done (for example 2/3).

Until its department is passed on, a group's work is Being set up: analysts see it on the work order with that badge, but cannot take it into work or enter results yet. Tick every department left (or All remaining departments) and the whole request moves to in progress. In the Work order setup list, Departments in work (1/3) shows how far a request has come.

Everyone in a department gets a notice when its work is passed on, linking to the work order (one sample) or to Today showing that request. Passed one on too early? Open Move to in progress again and untick it: the department goes back to setup and is told not to start yet. This works only while nobody has started on its work; after that it stays in work, marked work has started.

A group added later, after its department or the request is already in work, goes straight into work, and so does any group added to a work order that has already started. A group still marked Being set up on a work order has its own Move to in progress button: it passes that department's part of the request into work at any time, whatever the request's status.

Open the request at the top opens the full request page; its ← link brings you back to Work order setup. ⋯ also holds Edit request and Regulatory frameworks…. On the request page, ⋯ › Work order setup opens this page while the request is Received or in Configuration.

📷 Screenshot: a request's Work order setup page: the samples on the left, one sample on the right with its assignees in the header and its Work order

The request page

Click View request in a request's ⋯ menu on a list, or View request on its edit page. While the request is Received or in Configuration, Prepare work order in the ⋯ menu on the Requests list opens its Work order setup page instead. The header looks like Work order setup's: the status, and while the request is Received or in Configuration where reception stands; under it the form, customer, laboratory, received and the external number, each with its icon. Under the header and the status steps, the page has two tabs:

  • Overview: the samples in a table (configuration, work order, how many results are verified), Needs attention, the general information, the documents, and Request settings: the rulebooks, the expert opinion choice and, when your lab is connected to Financial, the invoice. Needs attention lists what is waiting: a sample with no work order, someone who hasn't finished configuring, results sent back or waiting for verification, unread messages. Click a sample, or a line under Needs attention, to open it.
  • Samples and work orders: the samples on the left, with a set's components under it. Each shows its configuration status, how many of its results are verified, and its unread messages. All, Mine (samples where you still have something to do) and Attention filter the list. Click a sample to open it on the right. A set lists its components; click one to open it. With more than one sample the list starts folded; see Moving between samples.

The open tab and sample are part of the page address, so reloading the page keeps them.

Click any of the status steps to look at that stage. The box under the steps then says when the request reached it and moved on, and who did it (from the request's History), what the stage is for, and its checks as they stand now. A request imported from the old LIMS has no such history, so only Received has a date. Looking at a stage moves nothing; the button in the header does that. Click the current step, or Back to …, to return.

Moving between samples

On the request page's Samples and work orders tab and on Work order setup, the samples list stays out of the way:

  • One sample: there is no list; the sample has the whole width.
  • Several samples: the list starts folded to a narrow strip — the sample icon with how many samples there are, then a dot for each sample in list order (grey: not configured, amber: partly configured, green: configured). The open sample's dot is ringed; point at a dot for the sample's name. A set's dots share a light grey strip: the set's own dot is a small square, its components' dots follow it. Click a dot to open that sample. Click the icon to unfold the full list with its filter; the arrows beside the filter fold it again. SmartLIMS remembers which you prefer.
  • ← and → move to the previous or next sample, as do the arrows beside the sample's code ("‹ 2 / 6 ›"). The keys do nothing while you are typing in a field or have a list or window open.
  • The sample's heading — its code, name, badges and people — stays at the top of the screen while you scroll through its work, so you always know which sample you are in.
  • The details strip, folded, shows a few of the sample's fields; it leaves out the one that only repeats the sample's name.

📷 Screenshot: the Overview tab: the samples table, Needs attention and Request settings

Move a request through its statuses

The top of the request page shows its number, its status, and one button for the next step. Under it, the five statuses are laid out as steps: the ones done have a check, and the current one says how far it has got, for example "3 of 5 samples configured". Below the steps, a short note says what comes next and lists what the next step is waiting on, such as a sample with no work order yet.

Click the button to move the request on, and confirm. If something on that list is still open, SmartLIMS names it and asks whether to move on anyway; you can, and the open work stays open. Each move is written to the request's history (see History).

📷 Screenshot: the top of a request page: the number and status, Move to in progress, and the five steps with "3 of 5 samples configured"

Status What it means Button to move on
Received The request and its samples are logged; reception has not sent it to the laboratory yet. Only now can it be deleted. Start configuration here, or on the edit page Send to laboratory / Complete reception (see Send to laboratory)
Configuration The samples are being set up: assignees, work orders, frameworks. Move to in progress
In progress Testing is under way. Move to validated
Validated The results have passed technical review. Authorize
Authorized The request is released. Prepare for sending or Mark as sent
Ready to send The report is being prepared for the client. Mark as sent, or Back to Authorized
Sent The report went to the client. The request is archived and locked. This is the last status. None (an administrator can Unlock it, see Sent and locked)

Edit request sits beside the button while the request is Received or in Configuration; after that it moves to the ⋯ menu. The ⋯ menu also holds Test report (once the request is Validated or later — see Test reports), Expert opinion…, Regulatory frameworks…, History and, while the request is Received, Delete request.

Anyone with "Manage requests" can press these buttons; SmartLIMS has no separate approver permission for Authorize. If your quality system needs that, decide in your lab who presses it. Requests can't be put on hold, rejected or cancelled yet. For the whole flow, see How a sample moves through LIMS.

Sent and locked

Once a request is Authorized, its report goes to the client. Prepare for sending marks it Ready to send while the report is being put together; Back to Authorized undoes that. Mark as sent asks for an optional note (how and to whom it was sent) and moves the request to Sent. Sending the results to SmartQC marks the request as sent by itself. Besides the request page, you can do this from the report page, from each row's ⋯ menu on the Reports list, and (Mark as sent) from the ⋯ menu on the Requests list.

A sent request is archived and locked: its samples, work orders, results and documents can no longer be changed, and the page says so. Messages stay open. To correct something, someone with the Unlock sent requests permission clicks Unlock and gives a reason. The request goes back to Authorized, the reason is kept in its history, and you send it again once it is corrected.

Configure each sample

During Configuration, every sample is set up by one or more people, its assignees. On the request page, open Samples and work orders and pick the sample. Its header shows who is on it and how far they got; under the sample's details come Preparation (only when the sample has a preparation step) and Work order. A set has Components instead of a work order.

  1. At the top right of the sample, the assignees show as circles with their initials (point at one to see the name and whether they are done). To add people, click +, search, and click names; the change is saved when you close the list. To take a part yourself, click Add me. To remove someone, click their circle and choose Remove (if they had already marked their part done, SmartLIMS asks first). Whoever stays keeps what they already marked done.
  2. Each assignee prepares their part, for example adds the tests to the work order, and then clicks Mark my part done beside the circles (or clicks their own circle and chooses it). The button only shows to an assignee who isn't done yet.
  3. A person gets a green check on their circle once they are done. Under the sample's name, the Configuration 1/3 badge fills its ring as people finish and turns into a green Configured at the end; point at it to see what configuration means and who it is still waiting on.

The sample's configuration status follows from that:

Configuration status Meaning
Not configured Nobody has marked their part done (or nobody is assigned).
Partially configured Some assignees are done.
Configured All assignees are done.

The samples list and the Overview table show each sample's configuration status. Adding or removing assignees leaves the others' "done" marks as they are.

Under the header, a folded strip shows the sample's first fields; click it to see all of them, its tracking numbers and its documents. The sample's ⋯ menu holds what is used less often: Messages, Rulebooks for this sample…, Allow reflex testing, Trigger reflex testing…, Add preparation step and Edit sample fields. See Work orders and results for the work order itself.

Reflex testing

Reflex testing means adding tests because of a result, for example a confirmation test after a positive screening (see Glossary).

  1. During configuration, open the sample's ⋯ menu and click Allow reflex testing on the samples where this may happen. They show a Reflex allowed badge.
  2. When a result calls for more tests while the request is In progress, open that sample's ⋯ menu, click Trigger reflex testing…, write why, and confirm.
  3. The request goes back to Configuration. Add the extra tests to the sample's work order, then click Move to in progress again.

Trigger reflex testing… shows only on allowed samples while the request is In progress. Both the eligibility change and the trigger are written to the audit trail.

Expert opinion

The expert opinion is the lab's written conclusion about the results. You choose per request how it is written, on the New request or Edit request page:

Choice Where you write it
Per work order Each sample's work order has its own expert opinion field.
Consolidated expert opinion One opinion on the request page covers all samples. The work orders then say that the opinion is managed on the request.

On the request page, open ⋯ and click Expert opinion…. The window shows the same choice, and with Consolidated expert opinion picked, the opinion itself:

  1. Type the opinion and click Save expert opinion.
  2. Or click Pull from work orders to start from what was already written on the work orders. After you confirm, it collects the opinions from all samples' work orders, keeps each distinct text once and replaces what is in the box.

Opinions written on work orders are kept even when you switch to consolidated, so switching back shows them again.

Documents

You can attach files at two levels:

  • Request documents: things that concern the whole request, such as the order form or a delivery note. You add them on the Edit request page; the request page lists them.
  • Sample documents: photos, chain-of-custody forms, a customer's own results. You add them with the sample on the Edit request page, or in the sample's details strip on the request page.

Include in report marks a file as one that belongs with the results. The test report doesn't add these files to its print yet, so for now the mark only records your choice.

History

The request's history (its audit trail) lists what happened to the request. On the request page, click Activity and open History, or pick History in the ⋯ menu. It records:

  • the request being created and each status change;
  • changes to the assignees and each completed sample configuration;
  • reflex eligibility changes and reflex triggers;
  • expert opinion changes;
  • changes to the request's or a sample's regulatory frameworks;
  • billing updates from Financial.

Each entry shows who did it, the role they had at the time, and when. Entries can't be changed or deleted. This supports the record-keeping that ISO/IEC 17025 expects; it does not cover every change to every field. See Quality and ISO/IEC 17025.

Form versions

Forms change over time: a field is added, a label is reworded. Every time a form is saved, it gets a new version. A request keeps the version of the form it was created with, shown as "Version N" on the request. Later changes to the form don't change existing requests, and the laboratories a request can use also come from that version. See Forms.

Service requests

Some work has no samples, such as a declaration or a certificate: you do it, attach the document and print it. It still needs a request number and an invoice. For this work, use a request on a form whose Kind is Service (see Forms).

A service request is numbered like any other request on its form. It has no samples, work orders, test report, expert opinion or regulatory frameworks, so the request page shows only its fields and Documents.

  1. Click New request, pick the service form and fill in its fields. Click Create request.
  2. On the request page, attach the finished document under Documents.
  3. Click Complete. The request needs at least one attached document first; the only check under the steps is "Document attached".
  4. Print the document and send it out as usual: Prepare for sending, then Mark as sent.
Status What it means Button to move on
Received The request is logged and waits for its document. Complete
Completed The document is attached and the service is done. Prepare for sending or Mark as sent
Ready to send The document is being prepared for the client. Mark as sent, or Back to Completed
Sent The document went to the client. The request is archived and locked, as in Sent and locked. None

When your lab is connected to Financial, a service request is invoiced with the price-list item set on its form, one item per request, once it is Completed. See Financial.

The Requests list has a Kind filter (under + Add filter) to show only testing or only service requests. A request can't move between a testing form and a service form.

Tips

  • On the New request page, pressing Backspace in an empty sample name removes that row.
  • After Create request, the browser's Back button doesn't bring the filled-in page back. Use Edit request instead.
  • The request page has an Activity button for messages about the whole request, and each sample has its own thread. See Messages and notifications.
  • When your lab is connected to Financial, the request's invoice is under Request settings on the Overview tab. See Financial.
  • Customers and inspectors are picked in the form's fields. See Customers and inspectors.
↑↓ to move ↵ to open esc to close